What exactly is an oven pin chain? And why is it so important? It is critical for two-piece metal decorating operations that transfer and cure literally thousands of cans per minute. To do this effectively however the oven pin chain needs to be long lasting, true running and be made to a high quality. You need the best performing chains for the important and demanding applications that these oven pin chains undertake.
Depending on your needs there are two styles of these chains that you are able to gain and that can help you be the most productive and cost effective within whatever industry you are operating in. These two types are as follows:
• Standard oven pin chain – this chain has the ability to perform in the harshest of environments by providing components that have the same superior qualities as industrial drive chains such as raw material selection and closely controlled heat treatment. These standard ones generally start at a ¾” pitch but the chain can then be improved to perform in the harshest environments.
• O-ring pin oven chains – aspects such as high temperatures, contaminants and higher line speeds place ever increasing demands on the chains. This can unfortunately cause costly problems such as replacement parts, downtime in the industry and lost production. In order to stop this from happening O-ring pin oven chains are designed to handle these aspects a lot better.
These types of chains should always be designed to reduce downtime and stand up to harsh conditions as well as maximise operating capabilities. But what exactly is a pin oven used for? Their main purpose is for drying any decorative coatings on two-piece beverage cans. You are able to get them for this purpose with the capacity of drying up to 2400 cans per minute.
In order for these ovens to operate to the best of there ability they need to be fitted with the correct chain, which is why it is so important that you ensure you look into the oven pin chains that are available. It’s amazing how much of a difference a chain can make to the operating of machinery and applications. By ensuring that your line of business is using the correct chains within whatever industry you are operating in, you will be making sure that your productivity is kept at the highest level possible and your machinery will effectively last longer.
You can’t just buy any old chain for a piece of machinery; you need to make sure that the chain you do end up getting is suited to the job in hand and the machinery that is being used to do the job. So with a pin oven you need the correct chain and as I have previously mentioned, two prime examples of which ones you should be using are standard or O-ring. Just make sure that if you are on the look out for a new oven pin chain you keep the points that I have mentioned in mind to ensure that you end up with the correct chain for the job.
If you are in need of Oven Pin Chains look no further than Howcroft Industrial Supplies, home to all of your construction and industrial needs.
Tuesday, 10 March 2009
Attachment Chains
A roller chain with the appropriate attachment plays an essential role when it comes to moving objects, transporting items or lifting and positioning different things. You could be in need of attachments for double pin chains, hollow pin chains or even for plated and coated chains. So what do these attachments actually do?
These attachment chains are parts that are fitted to a base chain in order to adapt it for a particular purpose as a conveying medium. They can either be incorporated to form an integral part of a link plate or they could be built into the chain; forming a replacement of the normal link. This is just one example of how an attachment chain could be fixed to the chain plate; other attachment chains can be fixed to the chain plates by projection or fillet welding, to either one or both sides of the chain.
It should be noted however that when it comes to these type of chains there are two main types, which are single pitch and double pitch attachment chains. Let me start by explaining a little bit more about single pitch attachment chains. Basically these are based on roller chains that feature attachments added to them in order to make them suitable for conveyor use. Single pitch attachment chains are ideal for short distances. They are best for conveying small light goods; this is due to a smaller chain pitch. With these single pitch attachment chains you are getting a smooth transfer and low noise. Also with these it should be noted that standard roller chain sprockets can be used in most cases.
Moving onto double pitch; this attachment chain is the most commonly used one. This fact can easily be seen through the actuality that it is utilised widely within automotive parts as well as electronic and precision machinery industries. With the double pitch attachment chain there is the same basic construction as with single pitch but it has twice the length, hence the name. This form of attachment chain also has the benefit of suffering less wear to components. The reason for this is due to the fact larger conveyor lengths are possible due to it being double pitch but it uses only half the components when compared to a single pitch.
In many cases roller chains are often adapted for conveying duties; this is done through the addition of attachments. Standard types of attachments include bent or straight ones on one or both sides of the roller chain in order to enhance usability. These attachments however are not just suited to roller chains; they are available for a wide selection, including; RS chain, conveyor chain, hollow pin chain and curved chain.
These chains are vital to a lot of industries and help to keep the construction industry moving. So if you are in the line of work that requires such a chain you are in luck as there are a number of stockists of such item and even if you can’t find what you are looking for, never fear as a lot of attachments can be made to order.
For all of your Attachment Chain needs look no further than the Industrial Supplies from Howcroft.
These attachment chains are parts that are fitted to a base chain in order to adapt it for a particular purpose as a conveying medium. They can either be incorporated to form an integral part of a link plate or they could be built into the chain; forming a replacement of the normal link. This is just one example of how an attachment chain could be fixed to the chain plate; other attachment chains can be fixed to the chain plates by projection or fillet welding, to either one or both sides of the chain.
It should be noted however that when it comes to these type of chains there are two main types, which are single pitch and double pitch attachment chains. Let me start by explaining a little bit more about single pitch attachment chains. Basically these are based on roller chains that feature attachments added to them in order to make them suitable for conveyor use. Single pitch attachment chains are ideal for short distances. They are best for conveying small light goods; this is due to a smaller chain pitch. With these single pitch attachment chains you are getting a smooth transfer and low noise. Also with these it should be noted that standard roller chain sprockets can be used in most cases.
Moving onto double pitch; this attachment chain is the most commonly used one. This fact can easily be seen through the actuality that it is utilised widely within automotive parts as well as electronic and precision machinery industries. With the double pitch attachment chain there is the same basic construction as with single pitch but it has twice the length, hence the name. This form of attachment chain also has the benefit of suffering less wear to components. The reason for this is due to the fact larger conveyor lengths are possible due to it being double pitch but it uses only half the components when compared to a single pitch.
In many cases roller chains are often adapted for conveying duties; this is done through the addition of attachments. Standard types of attachments include bent or straight ones on one or both sides of the roller chain in order to enhance usability. These attachments however are not just suited to roller chains; they are available for a wide selection, including; RS chain, conveyor chain, hollow pin chain and curved chain.
These chains are vital to a lot of industries and help to keep the construction industry moving. So if you are in the line of work that requires such a chain you are in luck as there are a number of stockists of such item and even if you can’t find what you are looking for, never fear as a lot of attachments can be made to order.
For all of your Attachment Chain needs look no further than the Industrial Supplies from Howcroft.
Corrosion and Moisture Resistant Roller Chains
Roller chains are an aspect of manufacturing and construction that are commonly used for the transmission of mechanical power. They are often found in an array of industries such as architecture, agriculture and mining and they are what keep conveyor belts moving. They are an important feature to get a number of jobs done and as the majority of these jobs are take place within corrosive and moist conditions it is essential that you have a roller chain that can withstand such conditions.
Corrosion is basically the breaking down of essential properties in a material due to a chemical reaction from the materials surroundings. In this case the material is a roller chain and the surroundings are the conditions that the chain is being used in.
Within corrosion there is a loss of electrons due to a react with water or oxygen. Due to the fact that most roller chains are exposed to moisture that could cause corrosion you need to be careful when choosing what chain to opt for as some may not be up to the job. So just how do you know which ones are best at preventing corrosion and other damage that can be caused by an exposure to moisture?
There are two main types of roller chains that you should be looking at to prevent such things; these two are stainless steel and nickel plated. Both of these have their advantages and disadvantages, the way you decide which to use comes down to the environment that you will be using them in. For example stainless steel offers the greatest resistance to corrosion and exposure to extreme temperatures. The corrosion resistance that stainless steel chains offer is superior to nickel-plated or coated chains. This type of roller chain is also available in a variety of grades depending on specific application requirements. However, while nickel plated are excellent against moisture damage they aren’t quite as good against corrosion for the pure fact that they don’t protect against corrosion caused by chemicals or acid.
Both of these roller chains are sufficient when it comes to protecting against corrosion and moisture and they are commonly used where there is a high exposure to weather, high humidity and machines that are frequently washed down with water.
As well as these two types of roller chain you are also able to get ones that have been treated with a mechanical zinc plating process with additional coatings applied for extra corrosion protection. This coating has been proved to be effective when used in wet, humid, saltwater or other moisture-related applications. In fact quite a few industries often prefer to opt for this rather than stainless steel or nickel-plated roller chains.
Corrosion, mainly due to exposure to moisture is a problem faced frequently by maintenance staff and engineers across many industries. It is through the damage caused by aspects such as chemicals, salt, routine wash downs and exposure to bad weather conditions that have a significant impact on production efficiency. So to ease this and to improve the life of machinery get a roller chain such as a coated one or stainless steel and nickel-plated that can handle the conditions that are thrown at them.
Howcroft Industrial Supplies are your answer if you are looking for Corrosion and Moisture Resistant Roller Chains.
Corrosion is basically the breaking down of essential properties in a material due to a chemical reaction from the materials surroundings. In this case the material is a roller chain and the surroundings are the conditions that the chain is being used in.
Within corrosion there is a loss of electrons due to a react with water or oxygen. Due to the fact that most roller chains are exposed to moisture that could cause corrosion you need to be careful when choosing what chain to opt for as some may not be up to the job. So just how do you know which ones are best at preventing corrosion and other damage that can be caused by an exposure to moisture?
There are two main types of roller chains that you should be looking at to prevent such things; these two are stainless steel and nickel plated. Both of these have their advantages and disadvantages, the way you decide which to use comes down to the environment that you will be using them in. For example stainless steel offers the greatest resistance to corrosion and exposure to extreme temperatures. The corrosion resistance that stainless steel chains offer is superior to nickel-plated or coated chains. This type of roller chain is also available in a variety of grades depending on specific application requirements. However, while nickel plated are excellent against moisture damage they aren’t quite as good against corrosion for the pure fact that they don’t protect against corrosion caused by chemicals or acid.
Both of these roller chains are sufficient when it comes to protecting against corrosion and moisture and they are commonly used where there is a high exposure to weather, high humidity and machines that are frequently washed down with water.
As well as these two types of roller chain you are also able to get ones that have been treated with a mechanical zinc plating process with additional coatings applied for extra corrosion protection. This coating has been proved to be effective when used in wet, humid, saltwater or other moisture-related applications. In fact quite a few industries often prefer to opt for this rather than stainless steel or nickel-plated roller chains.
Corrosion, mainly due to exposure to moisture is a problem faced frequently by maintenance staff and engineers across many industries. It is through the damage caused by aspects such as chemicals, salt, routine wash downs and exposure to bad weather conditions that have a significant impact on production efficiency. So to ease this and to improve the life of machinery get a roller chain such as a coated one or stainless steel and nickel-plated that can handle the conditions that are thrown at them.
Howcroft Industrial Supplies are your answer if you are looking for Corrosion and Moisture Resistant Roller Chains.
High Strength Chains
In order for a chain to be able to undertake its job correctly it needs to have a high strength. Most chains, depending on the specific application that you need it for, are designed for the rigors of heavy loads and lifting. High strength chains are an aspect of manufacturing and a part of many industries that are in demand, so the question is does your business have them?
For whatever job you need a chain for, it is recommended that you invest in a high strength chain. So how are these chains stronger than regular ones? This comes down to the production value of the chains. They are produced with wear resistance, resistance to Rafah and hardness and strength. Thanks to the way they are made, their strength becomes many times more than the strength of the bar that was used to make them.
How strong a chain is comes down to two factors; the breaking point and the tensile of the chain. The tensile refers to how much load a chain can withstand before breaking; hence finding out the breaking point of the chain. It is however important to remember that it is never safe to strain the load of a chain to anywhere near it’s breaking point. One of the main reasons for this is the fact that every time a piece of metal is strained to a point beyond its elastic limit it is permanently stretched and weakened.
Another reason as to why high strength chains are so good at what they do comes down to the fact they have been specially designed to incorporate pins that have been produced from medium carbon alloy steel. These pins are important as they have been hardened to give the chain a higher working load capacity and an additional resistance to fatigue in high load and pulsating type applications. There is one draw back to this however, which is the fact that these chains may have a slightly reduced wear life due to the material used and the heat treatment that is placed on the chain pins.
High strength chains are used for a variety of things; one of these uses includes hoisting weights. For this use they are made from a grade of wrought iron. In this case the tensile strength is usually between 40,000 to 48,000 lbs. per square inch. If this is the use of your high strength chain then it is important that it is not made from steel, instead wrought iron should be used as it will be able to withstand more.
There are numerous pieces of machinery and a vast array of industries that rely on high strength chains to get jobs done in the best possible way and in the quickest time allowed. They are a very important part of construction and manufacturing; in many cases people rely on them so much without even actually realizing it. This is why you need to make sure you invest in the best available so make sure you shop around for them.
If you are in the market for some High Strength Chains then look no further than Howcroft Industrial Supplies; they are stockists of everything you could possibility need for any industry.
For whatever job you need a chain for, it is recommended that you invest in a high strength chain. So how are these chains stronger than regular ones? This comes down to the production value of the chains. They are produced with wear resistance, resistance to Rafah and hardness and strength. Thanks to the way they are made, their strength becomes many times more than the strength of the bar that was used to make them.
How strong a chain is comes down to two factors; the breaking point and the tensile of the chain. The tensile refers to how much load a chain can withstand before breaking; hence finding out the breaking point of the chain. It is however important to remember that it is never safe to strain the load of a chain to anywhere near it’s breaking point. One of the main reasons for this is the fact that every time a piece of metal is strained to a point beyond its elastic limit it is permanently stretched and weakened.
Another reason as to why high strength chains are so good at what they do comes down to the fact they have been specially designed to incorporate pins that have been produced from medium carbon alloy steel. These pins are important as they have been hardened to give the chain a higher working load capacity and an additional resistance to fatigue in high load and pulsating type applications. There is one draw back to this however, which is the fact that these chains may have a slightly reduced wear life due to the material used and the heat treatment that is placed on the chain pins.
High strength chains are used for a variety of things; one of these uses includes hoisting weights. For this use they are made from a grade of wrought iron. In this case the tensile strength is usually between 40,000 to 48,000 lbs. per square inch. If this is the use of your high strength chain then it is important that it is not made from steel, instead wrought iron should be used as it will be able to withstand more.
There are numerous pieces of machinery and a vast array of industries that rely on high strength chains to get jobs done in the best possible way and in the quickest time allowed. They are a very important part of construction and manufacturing; in many cases people rely on them so much without even actually realizing it. This is why you need to make sure you invest in the best available so make sure you shop around for them.
If you are in the market for some High Strength Chains then look no further than Howcroft Industrial Supplies; they are stockists of everything you could possibility need for any industry.
Stainless Steel Bearings
Bearings are the very thing that enables machinery to move at extremely high speeds as well as carry remarkable loads with ease and efficiency. In order to do this effectively however they are highly engineered and precision made. Some of the aspects that are expected of them include being able to offer high precision, reliability and durability as well as the ability to rotate at high speeds with minimal noise and vibration.
Some of you may be surprised at how many aspects and applications bearings are actually used in. Some examples of these are automobiles, airplanes, computers, construction equipment, machine tools, DVD players, refrigerators and ceiling fans. Basically if you have an application or piece of machinery that twists, turns and generally moves, chances are it probably has a bearing in it and one of the most popular types of bearings comes in the form of stainless steel. So why are stainless steel bearings so frequently used?
One of the main reasons as to why the popularity of stainless steel bearings is so high is down to the fact that they work so well under environments that contain moisture and that can be corrosive and abrasive. This makes them the perfect bearing to be used widely for food and beverage processing machinery as well as medical appliances and medicine equipments.
As well as these bearings being able to withstand moisture, corrosion and abrasion they also have a number of other benefits and features, which are as follows:
• They provide machinery and applications with reduced maintenance and equipment downtime.
• You can get them in a range of custom sizes and shapes to fit specific applications.
• Corrosion resistant for extreme environments and climates.
• Have a wide operating temperature.
• Thanks to the multiple proprietary formulations of the material, they eliminate noise and squeaks within equipment and machinery.
Stainless steel bearings consist of a single row of deep groove ball bearings and have the same deep raceway grooves and close conformity between raceways and balls as standard deep groove ball bearings made of carbon chromium (rolling bearing) steel. What makes these bearings stand out is they are without any filling slots and they can carry axial loads acting in both directions, even at high speeds.
The main common motions submitted by not only stainless steel bearings but all bearings are axial rotation, linear motion and spherical rotation as well as hinge motion. In order to complete all of these in the best way you need to use a bearing that can cope with a range of circumstances; stainless steel bearings do just this.
Without bearings we would be constantly replacing parts of machinery and applications that were worn out from friction. They play an essential part in a number of industries and as a result these industries need the very best when it comes to bearings, which is why so many industry professionals choose to use stainless steel bearings as they provide efficiency and of course because they are excellent when faced with corrosive and abrasive conditions.
For all of your Stainless Steel Bearing needs look no further than Howcroft Industrial Supplies.
Some of you may be surprised at how many aspects and applications bearings are actually used in. Some examples of these are automobiles, airplanes, computers, construction equipment, machine tools, DVD players, refrigerators and ceiling fans. Basically if you have an application or piece of machinery that twists, turns and generally moves, chances are it probably has a bearing in it and one of the most popular types of bearings comes in the form of stainless steel. So why are stainless steel bearings so frequently used?
One of the main reasons as to why the popularity of stainless steel bearings is so high is down to the fact that they work so well under environments that contain moisture and that can be corrosive and abrasive. This makes them the perfect bearing to be used widely for food and beverage processing machinery as well as medical appliances and medicine equipments.
As well as these bearings being able to withstand moisture, corrosion and abrasion they also have a number of other benefits and features, which are as follows:
• They provide machinery and applications with reduced maintenance and equipment downtime.
• You can get them in a range of custom sizes and shapes to fit specific applications.
• Corrosion resistant for extreme environments and climates.
• Have a wide operating temperature.
• Thanks to the multiple proprietary formulations of the material, they eliminate noise and squeaks within equipment and machinery.
Stainless steel bearings consist of a single row of deep groove ball bearings and have the same deep raceway grooves and close conformity between raceways and balls as standard deep groove ball bearings made of carbon chromium (rolling bearing) steel. What makes these bearings stand out is they are without any filling slots and they can carry axial loads acting in both directions, even at high speeds.
The main common motions submitted by not only stainless steel bearings but all bearings are axial rotation, linear motion and spherical rotation as well as hinge motion. In order to complete all of these in the best way you need to use a bearing that can cope with a range of circumstances; stainless steel bearings do just this.
Without bearings we would be constantly replacing parts of machinery and applications that were worn out from friction. They play an essential part in a number of industries and as a result these industries need the very best when it comes to bearings, which is why so many industry professionals choose to use stainless steel bearings as they provide efficiency and of course because they are excellent when faced with corrosive and abrasive conditions.
For all of your Stainless Steel Bearing needs look no further than Howcroft Industrial Supplies.
Oil Field Chains
Oil fields are an aspect of industry that are vital to the gathering of oil. In order to do this there are currently more than 50 oil fields and possibly some rigs drilling exploration wells within the UK. On top of this there are also more than 20 gas fields off the Norfolk coast.
The people and indeed the machinery that are working on these oil fields are working in tough conditions. It is due to this fact that the parts of the machinery are up to the job. One of the most important parts that make up the machinery are known as oil field chains. These chains are subject to some of the greatest loads and harshest environments. The chains need to be suitable to be able to cope with these conditions otherwise the job that they are designed to do won’t be done.
The working conditions are far more severe than the ones found in other industrial applications, which is why it is so important that special oil field chains are used in machinery as oppose to any other form of chain. These oil field chains can either be single strand or multiple strand and are typically constructed using heavy series components. So what sort of machinery are these oil field chains generally used on?
• Engine Components
• Tubular and casing draw works input
• Mud pump drives
• Transmission drives
• Catshafts
• Low and high drum
• Rotary Countershafts
• Rotary Tables
The above are the main uses of the oil field chains but the next question that a lot of people seem to ask is what makes these chains better than any other for the job at hand. There are a number of answers to this question; due to the chains close control or material specification to ensure a consistent response to heat treatment. Also due to their design they ensure optimum stress distribution in order for greater reliability. They were generally designed and developed to give improved fatigue resistance while minimizing susceptibility to stress corrosion cracking. Other reasons as to why oil field chains are specifically needed for the oil field environment are as follows:
• They have a specially formulated factory lubrication, which enables better initial wear, performance and enhanced corrosion resistance.
• All chains are proof loaded before packing in durable containers
• Closely controlled tolerances ensure smooth robust running even at high speeds.
• They are detachable for ease of fitting and replacement
These oil field chains are so good at what they do that they are also used in mining, logging and ball mill applications. Due to the safety and reliability that is associated with these chains they are only available from a few select highly professional chain manufacturers. So if you are on the lookout for oil field chains make sure that you shop around to get the best deal from the limited amount of suppliers you are able to get them from. In some cases they may need to be ordered in so make sure you get your order in nice and early.
Oil Field Chains are only available through a select few suppliers so let Howcroft Industrial Supplies fulfil all of your Oil Field Chain needs.
The people and indeed the machinery that are working on these oil fields are working in tough conditions. It is due to this fact that the parts of the machinery are up to the job. One of the most important parts that make up the machinery are known as oil field chains. These chains are subject to some of the greatest loads and harshest environments. The chains need to be suitable to be able to cope with these conditions otherwise the job that they are designed to do won’t be done.
The working conditions are far more severe than the ones found in other industrial applications, which is why it is so important that special oil field chains are used in machinery as oppose to any other form of chain. These oil field chains can either be single strand or multiple strand and are typically constructed using heavy series components. So what sort of machinery are these oil field chains generally used on?
• Engine Components
• Tubular and casing draw works input
• Mud pump drives
• Transmission drives
• Catshafts
• Low and high drum
• Rotary Countershafts
• Rotary Tables
The above are the main uses of the oil field chains but the next question that a lot of people seem to ask is what makes these chains better than any other for the job at hand. There are a number of answers to this question; due to the chains close control or material specification to ensure a consistent response to heat treatment. Also due to their design they ensure optimum stress distribution in order for greater reliability. They were generally designed and developed to give improved fatigue resistance while minimizing susceptibility to stress corrosion cracking. Other reasons as to why oil field chains are specifically needed for the oil field environment are as follows:
• They have a specially formulated factory lubrication, which enables better initial wear, performance and enhanced corrosion resistance.
• All chains are proof loaded before packing in durable containers
• Closely controlled tolerances ensure smooth robust running even at high speeds.
• They are detachable for ease of fitting and replacement
These oil field chains are so good at what they do that they are also used in mining, logging and ball mill applications. Due to the safety and reliability that is associated with these chains they are only available from a few select highly professional chain manufacturers. So if you are on the lookout for oil field chains make sure that you shop around to get the best deal from the limited amount of suppliers you are able to get them from. In some cases they may need to be ordered in so make sure you get your order in nice and early.
Oil Field Chains are only available through a select few suppliers so let Howcroft Industrial Supplies fulfil all of your Oil Field Chain needs.
Special Lubricated Chains
In general chains are used in industries that deal with high temperatures as well as unusual conditions. On top of this some chains have to work in dusty or abrasive conditions. The abrasive then mixes with the oil and forms slurry which makes the chain wear faster. It is due to this that in some cases special lubricants may be needed.
Special lubricated chains are specifically designed for applications that don’t permit regular lubrication, meaning the chain depends entirely on initial factory lubrication throughout its service life. For applications where regular lubrication is a challenge; special lubricated chains can offer a longer lasting solution. Plus best of all they can be used in almost every sector of industry where chains are used as transport or as part of a drive system.
When it comes to a chain there are said to be generally three points where the chain needs lubrication, firstly the rivets need to be lubricated as they move inside the inner links as the chain bends and straightens. The second point is the inside of the rollers; these need lubrication so that they revolve freely around the bushings as they engage and disengage the sprocket teeth. This is very important as the lubrication is what allows the rollers to actually roll; if they don’t they will slide along the sprocket teeth, causing accelerated sprocket wear. Finally the third point where a chain needs lubrication is on the surface where the outer side plates overlap the inner side plates.
In many industries, companies end up having to replace chains altogether and replace them with belts. The reason being is down to poor lubrication of the chains, which leads to the chains only lasting a short time; but why is the lubrication of the chains poor? The answer to this question can be found within the way that the current chain lubrication process takes place. This involves applying a heavy oil or grease to the outside of the chain. Even though this ensures that the outside of the chain and the sprockets are lubricated well, it does nothing to protect the contacting surfaces inside the pin and bushing/ plate/ roller/ hook, which are considered to be the most important area of the chain when it comes to vulnerability. It is down to reasons such as this that special lubrication when it comes to chains is so important.
Chains are generally used in industries such as agriculture, food processing, packaging, printing, textile and chemical processing. When used in such industries it is very easy for contaminants to be introduced, which can cause damage to the standard chain. These contaminants are aspects such as dirt, mud, food particles, paper fines, dust and moisture. All of these can cause a build up on the chain and clog the openings on standard roller chain where lubrication enters the pin/bushing area. These contaminants can even get inside the chain, actually damaging the surface of pins and bushings.
If damage is caused to the chain then this can often slow an industries production down, which is one of the last things that you want! So to ensure that everything runs smoothly within your business I recommend that you invest in some special lubricated chains.
For all of your Special Lubricated Chains needs look no further than Howcroft Industrial Solutions.
Special lubricated chains are specifically designed for applications that don’t permit regular lubrication, meaning the chain depends entirely on initial factory lubrication throughout its service life. For applications where regular lubrication is a challenge; special lubricated chains can offer a longer lasting solution. Plus best of all they can be used in almost every sector of industry where chains are used as transport or as part of a drive system.
When it comes to a chain there are said to be generally three points where the chain needs lubrication, firstly the rivets need to be lubricated as they move inside the inner links as the chain bends and straightens. The second point is the inside of the rollers; these need lubrication so that they revolve freely around the bushings as they engage and disengage the sprocket teeth. This is very important as the lubrication is what allows the rollers to actually roll; if they don’t they will slide along the sprocket teeth, causing accelerated sprocket wear. Finally the third point where a chain needs lubrication is on the surface where the outer side plates overlap the inner side plates.
In many industries, companies end up having to replace chains altogether and replace them with belts. The reason being is down to poor lubrication of the chains, which leads to the chains only lasting a short time; but why is the lubrication of the chains poor? The answer to this question can be found within the way that the current chain lubrication process takes place. This involves applying a heavy oil or grease to the outside of the chain. Even though this ensures that the outside of the chain and the sprockets are lubricated well, it does nothing to protect the contacting surfaces inside the pin and bushing/ plate/ roller/ hook, which are considered to be the most important area of the chain when it comes to vulnerability. It is down to reasons such as this that special lubrication when it comes to chains is so important.
Chains are generally used in industries such as agriculture, food processing, packaging, printing, textile and chemical processing. When used in such industries it is very easy for contaminants to be introduced, which can cause damage to the standard chain. These contaminants are aspects such as dirt, mud, food particles, paper fines, dust and moisture. All of these can cause a build up on the chain and clog the openings on standard roller chain where lubrication enters the pin/bushing area. These contaminants can even get inside the chain, actually damaging the surface of pins and bushings.
If damage is caused to the chain then this can often slow an industries production down, which is one of the last things that you want! So to ensure that everything runs smoothly within your business I recommend that you invest in some special lubricated chains.
For all of your Special Lubricated Chains needs look no further than Howcroft Industrial Solutions.
Subscribe to:
Posts (Atom)